Mechanistic studies of isomeric [2]rotaxanes consisting of two different tetrathiafulvalene units reveal that the movement of cyclobis(paraquat-p-phenylene) can be controlled.

Controlling the movement in artificial molecular machines is a key challenge that needs to be solved before their full potential can be harnessed. In this study, two isomeric tri-stable [2]rotaxanes 1·4PF6 and 2·4PF6 incorporating both a tetrathiafulvalene (TTF) and a monopyrrolotetrathiafulvalene (MPTTF) unit in the dumbbell component have been synthesised to measure the energy barriers when the tetracationic cyclobis(paraquat-p-phenylene) (CBPQT4+) ring moves across either a TTF2+ or an MPTTF2+ dication. By strategically exchanging one of the thiomethyl barriers on either the TTF unit or the MPTTF unit with the bulkier thioethyl group, the movement of the CBPQT4+ ring in 14+ and 24+ can be controlled to take place in only one direction upon tetra-oxidation. Cyclic voltammetry and 1H NMR spectroscopy were used to investigate the switching mechanism and it was found that upon tetra-oxidation of 14+ and 24+, the CBPQT4+ ring moves first to a position where it is located between the TTF2+ and MPTTF2+ dications producing high-energy co-conformations which slowly interconvert into thermodynamically more stable co-conformations. The kinetics of the movement occurring in the tetra-oxidised [2]rotaxanes 18+ and 28+ were studied at different temperatures allowing the free energy of the transition state, when CBPQT4+ moves across TTF2+ (21.5 kcal mol-1) and MPTTF2+ (20.3 kcal mol-1) at 298 K, to be determined. These results demonstrate for the first time that the combination of a TTF and an MPTTF unit can be used to induce directional movement of the CBPQT4+ ring in molecular machines with a 90% efficiency.

Evaluating the energy landscape of an out-of-equilibrium bistable [2]rotaxane containing monopyrrolotetrathiafulvalene.

The unique redox properties of monopyrrolotetrathiafulvalene can be used to induce directional movement in interlocked molecules. In this study, the kinetics for the directional movement of cyclobis(paraquat-p-phenylene) across the dioxidised monopyrrolotetrathiafulvalene in a [2]rotaxane is quantified by time-resolved 1H NMR spectroscopy.

Quantifying the barrier for the movement of cyclobis(paraquat-p-phenylene) over the dication of monopyrrolotetrathiafulvalene.

A bistable [2]pseudorotaxane 1⊂CBPQT·4PF6 and a bistable [2]rotaxane 2·4PF6 have been synthesised to measure the height of an electrostatic barrier produced by double molecular oxidation (0 to +2). Both systems have monopyrrolotetrathiafulvalene (MPTTF) and oxyphenylene (OP) as stations for cyclobis(paraquat-p-phenylene) (CBPQT4+). They have a large stopper at one end while the second stopper in 24+ is composed of a thioethyl (SEt) group and a thiodiethyleneglycol (TDEG) substituent, whereas in 1⊂CBPQT4+, the SEt group has been replaced with a less bulky thiomethyl (SMe) group. This seemingly small difference in the substituents on the MPTTF unit leads to profound changes when comparing the physical properties of the two systems allowing for the first measurement of the deslipping of the CBPQT4+ ring over an MPTTF2+ unit in the [2]pseudorotaxane. Cyclic voltammetry and 1H NMR spectroscopy were used to investigate the switching mechanism for 1⊂CBPQT·MPTTF4+ and 2·MPTTF4+, and it was found that CBPQT4+ moves first to the OP station producing 1⊂CBPQT·OP6+ and 2·OP6+, respectively, upon oxidation of the MPTTF unit. The kinetics of the complexation/decomplexation process occurring in 1⊂CBPQT·MPTTF4+ and in 1⊂CBPQT·OP6+ were studied, allowing the free energy of the transition state when CBPQT4+ moves across a neutral MPTTF unit (17.0 kcal mol-1) or a di-oxidised MPTTF2+ unit (24.0 kcal mol-1) to be determined. These results demonstrate that oxidation of the MPTTF unit to MPTTF2+ increases the energy barrier that the CBPQT4+ ring must overcome for decomplexation to occur by 7.0 kcal mol-1.

Probing the Electrostatic Barrier of Tetrathiafulvalene Dications using a Tetra-stable Donor-Acceptor [2]Rotaxane.

A tetra-stable donor-acceptor [2]rotaxane 1⋅4PF6 has been synthesized. The dumbbell component is comprised of an oxyphenylene (OP), a tetrathiafulvalene (TTF), a monopyrrolo-TTF (MPTTF), and a hydroquinone (HQ) unit, which can act as recognition sites (stations) for the tetra-cationic cyclophane cyclobis(paraquat-p-phenylene) (CBPQT4+ ). The TTF and the MPTTF stations are located in the middle of the dumbbell component and are connected by a triethylene glycol (TEG) chain in such a way that the pyrrole moiety of the MPTTF station points toward the TTF station, while the TTF and MPTTF stations are flanked by the OP and HQ stations on their left hand side and right hand side, respectively. The [2]rotaxane was characterized in solution by 1 H NMR spectroscopy and cyclic voltammetry. The spectroscopic data revealed that the majority (77 %) of the tetra-stable [2]rotaxane 14+ exist as the translational isomer 1⋅MPTTF4+ in which the CBPQT4+ ring encircles the MPTTF station. The electrochemical studies showed that CBPQT4+ in 1⋅MPTTF4+ undergoes ring translation as result of electrostatic repulsion from the oxidized MPTTF unit. Following tetra-oxidation of 1⋅MPTTF4+ , a high-energy state of 18+ was obtained (i.e., 1⋅TEG8+ ) in which the CBPQT4+ ring was located on the TEG linker connecting the di-oxidized TTF2+ and MPTTF2+ units. 1 H NMR spectroscopy carried out in CD3 CN at 298 K on a chemically oxidized sample of 1⋅MPTTF4+ revealed that the metastable state 1⋅TEG8+ is only short-lived with a lifetime of a few minutes and it was found that 70 % of the positively charged CBPQT4+ ring moved from 1⋅TEG8+ to the HQ station, while 30 % moved to the much weaker OP station. These results clearly demonstrate that the CBPQT4+ ring can cross both an MPTTF2+ and a TTF2+ electrostatic barrier and that the free energy of activation required to cross MPTTF2+ is ca. 0.5 kcal mol-1 smaller as compared to TTF2+ .

Tetrathiafulvalene-calix[4]pyrrole: a versatile synthetic receptor for electron-deficient planar and spherical guests.

The first tetrakis-tetrathiafulvalene-calix[4]pyrrole (TTF-C[4]P) was reported in 2004. Early on it and related π-extended TTF-C[4]Ps were found to function as both anion receptors and as hosts for planar electron deficient neutral guests, including nitroaromatic explosives. Anion binding was found to occur with a 1 : 1 binding stoichiometry and to stabilise the cone C[4]P conformation, whereas planar electron deficient guests were bound in a cooperative 1 : 2 fashion to the 1,3-alternate conformer. Addition of strongly complexing anions was found to trigger release of the electron deficient guests concurrent with a conformational change to the cone form. Subsequent studies led to the discovery of anion-induced complexation with C60, and the finding that the resulting complexes would support fast photoinduced electron transfer events. Synthetic advances then led to the preparation of nonsymmetric TTF-C[4]Ps where a single moiety organises the receptor in either the 1,3-alternate conformation or the partial cone conformation, thus modifying both selectivity and sensitivity. TTF-C[4]P-based stimulus responsive systems, that rely on anions and cations as controlling inputs, have also been developed and studied in recent years. This review provides a summary of TTF-C[4]P-related chemistry.

Salts accelerate the switching kinetics of a cyclobis(paraquat-p-phenylene) [2]rotaxane.

The rate at which the macrocyclic cyclobis(paraquat-p-phenylene) ring of a bistable [2]rotaxane moves from a tetrathiafulvalene station to an oxyphenylene station upon oxidation of the tetrathiafulvalene station is found to be increased in the presence of added salts. Compared to the salt-free case, 0.1 M solutions of a series of tetraalkylammonium hexafluorophosphate salts (R4N·PF6, R = H, Me, Et or n-Bu) and of tetrabutylammonium perchlorate (n-Bu4N·ClO4) all afford an increased switching rate, which is largest in the case of n-Bu4N·ClO4 with smaller anions. Variation in the size of the ammonium cation has no significant effect. These results indicate that the addition of excess ions can be used as an accelerator to speed up shuttling processes in rotaxanes and catenanes based on the mobile cyclobis(paraquat-p-phenylene) ring, and that the choice of anion offers a convenient means of controlling the extent of this effect.

Functionalised tetrathiafulvalene- (TTF-) macrocycles: recent trends in applied supramolecular chemistry.

Tetrathiafulvalene (TTF) has been extensively explored as a π-electron donor in supramolecular systems. Over the last two decades substantial advances have been made in terms of constructing elaborate architectures based on TTF and in exploiting the resulting systems in the context of supramolecular host-guest recognition. The inherent electron-donating character of TTF derivatives has led to their use in the construction of highly efficient optoelectronic materials, optical sensors, and electron-transfer ensembles. TTFs are also promising candidates for the development of the so-called "functional materials" that might see use in a range of modern technological applications. Novel synthetic strategies, coupled with the versatility inherent within the TTF moiety, are now allowing the architecture of TTF-based systems to be tuned precisely and modified for use in specific purposes. In this critical review, we provide a "state-of-the-art" overview of research involving TTF-based macrocyclic systems with a focus on their use in supramolecular host-guest recognition, as components in non-covalent electron transfer systems, and in the construction of "molecular machines".

Electrochemical control of the single molecule conductance of a conjugated bis(pyrrolo)tetrathiafulvalene based molecular switch.

As the field of unimolecular electronics develops, there is growing interest in the development of functionalised molecular wires, such as switches, which will allow for more complex molecular-scale circuits. To this end, a three redox state single molecule switch, 1, based on bis(pyrrolo)tetrathiafulvalene (BPTTF) has been designed, synthesised and investigated using scanning tunnelling microscopy break junction (STM-BJ) studies and quantum transport calculations. Oxidising the BPTTF unit increases its conjugation, which was anticipated to increase the molecular conductance of 1. By changing the redox state of 1 electrochemically it was possible to vary the single molecule conductance by more than an order of magnitude (from 10-5.2G0 to 10-3.8G0). Simulations afforded a qualitatively similar trend. An additional, higher conductance feature is present in most traces at junction sizes of around 2.0 nm - further extension affords the switchable lower conductance feature at junction sizes closer to the molecular length (ca. 3.0 nm). Analysis of the conductance traces shows that these two conductance features occur sequentially in nearly all junctions. This behaviour is attributed to an alternative initial junction conformation in which one or more of the BPTTF sulfur atoms acts as an anchoring group. This hypothesis is supported by a computational study of binding conformations and STM-BJ studies on a model compound, 2, with only one thiol anchor. Our results indicate that the redox properties of BPTTF make it an excellent candidate for use in single molecule switches.

Enhanced detection of explosives by turn-on resonance Raman upon host-guest complexation in solution and the solid state.

The recognition of nitroaromatic explosives by a tetrakis-tetrathiafulvalene-calix[4]pyrrole receptor (TTF-C[4]P) yields a "turn on" and fingerprinting response in the resonance Raman scattering observed in solution and the solid state. Intensity changes in nitro vibrations with analyte complexation occur via a mechanism of resonance between the 785 nm laser line and the strongly absorbing charge-transfer chromophore arising from the complex between electron-donating TTF-C[4]P and electron-accepting nitroaromatic explosives. The addition of chloride forms the Cl-·TTF-C[4]P complex resetting the system for reuse.

Ionic manipulation of charge-transfer and photodynamics of [60]fullerene confined in pyrrolo-tetrathiafulvalene cage.

A cage molecule incorporating three electron donating monopyrrolotetrathiafulvalene units was synthesised to host electron accepting [60]fullerenes. Formation of a strong 1 : 1 donor-acceptor (D-A) complex C60⊂1 was confirmed by solid state X-ray analysis as well as 1H NMR and absorption spectroscopic analyses of the arising charge-transfer (CT) band (λ = 735 nm, ε ≈ 840 M-1 cm-1). Inserting Li+ inside the [60]fullerene increased the binding 28-fold (Ka = 3.7 × 106 M-1) and a large bathochromic shift of the CT band to the near infrared (NIR) region (λ = 1104 nm, ε ≈ 4800 M-1 cm-1) was observed.

Pseudorotaxane capped mesoporous silica nanoparticles for 3,4-methylenedioxymethamphetamine (MDMA) detection in water.

Mesoporous silica nanoparticles loaded with fluorescein and capped by a pseudorotaxane, formed between a naphthalene derivative and cyclobis(paraquat-p-phenylene) (CBPQT4+), were used for the selective and sensitive fluorogenic detection of 3,4-methylenedioxymethamphetamine (MDMA).

Very Strong Binding for a Neutral Calix[4]pyrrole Receptor Displaying Positive Allosteric Binding.

The dual-analyte responsive behavior of tetraTTF-calix[4]pyrrole receptor 1 has been shown to complex electron-deficient planar guests in a 2:1 fashion by adopting a so-called 1,3-alternate conformation. However, stronger 1:1 complexes have been demonstrated with tetraalkylammonium halide salts that defer receptor 1 to its cone conformation. Herein, we report the complexation of an electron-deficient planar guest, 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTCDA, 2) that champions the complexation with 1, resulting in a high association constant Ka = 3 × 1010 M-2. The tetrathiafulvalene (TTF) subunits in the tetraTTF-calix[4]pyrrole receptor 1 present a near perfect shape and electronic complementarity to the NTCDA guest, which was confirmed by X-ray crystal structure analysis, DFT calculations, and electron density surface mapping. Moreover, the complexation of these species results in the formation of a charge transfer complex (22⊂1) as visualized by a readily apparent color change from yellow to brown.

Tetrathiafulvalene- (TTF-) Derived Oligopyrrolic Macrocycles.

After the epochal discovery of the "organic metal", namely, tetrathiafulvalene (TTF)-7,7,8,8-tetracyano-p-quinodimethane (TCNQ) dyad in 1973, scientists have made efforts to derivatize TTF for constructing various supramolecular architectures to control the charge-transfer processes by adjusting the donor-acceptor strength of the dyads for numerous applications. The interesting inherent electronic donor properties of TTFs control the overall electrochemical properties of the supramolecular structures, leading to the construction of highly efficient optoelectronic materials, photovoltaic solar cells, organic field-effect transistors, and optical sensors. Modified TTF structures thus constitute promising candidates for the development of so-called "functional materials" that could see use in modern technological applications. The versatility of the TTF unit and the pioneering synthetic strategies that have been developed over the past few decades provide opportunities to tune the architecture and function for specific purposes. This review covers the "state of the art" associated with TTF-annulated oligopyrrolic macrocyclic compounds. Points of emphasis include synthesis, properties, and potential applications.

Probing the Role of Glycol Chain Lengths in π-Donor-Acceptor [2]Pseudorotaxanes Based on Monopyrrolo-Tetrathiafulvalene and Cyclobis(paraquat-p-phenylene).

We have investigated and quantified the role that the glycol chain length has on the strength of the noncovalent bonding interactions taking place between cyclobis(paraquat-p-phenylene) (CBPQT4+) and five different monopyrrolo-tetrathiafulvalene (MPTTF) derivatives that only differ in the length of the N-substituted glycol chain. The MPTTF derivatives were used to form [2]pseudorotaxanes by mixing them with CBPQT4+. The binding constants (Ka) associated with the complexation process leading to the formation of the [2]pseudorotaxanes were obtained using the UV-vis-NIR dilution method and the [2]pseudorotaxanes were characterized structurally using 1H NMR spectroscopy. These experimental investigations clearly indicate that the glycol chains provide additional stability to the [2]pseudorotaxanes findings that were further supported by density functional theory (DFT) studies. The DFT calculated superstructure of the [2]pseudorotaxane 3⊂CBPQT4+ reveal that [C-H···O] hydrogen bonding interactions between the acidic α-H protons in CBPQT4+ and the oxygen atoms present in the glycol chain can take place on the exterior of the [2]pseudorotaxane. However, the length of the glycol chain is of paramount importance and the present studies show that the first and second oxygen atom in the [2]pseudorotaxanes 2-5⊂CBPQT4+ are engaged in [C-H···O] hydrogen bonding interactions with CBPQT4+, whereas the third and fourth oxygen atoms are not.

Design and Sensing Properties of a Self-Assembled Supramolecular Oligomer.

Supramolecular polymers are a class of macromolecules stabilized by weak non-covalent interactions. These self-assembled aggregates typically undergo stimuli-induced reversible assembly and disassembly. They thus hold great promise as so-called functional materials. In this work, we present the design, synthesis, and responsive behavior of a short supramolecular oligomeric system based on two hetero-complementary subunits. These "monomers" consist of a tetrathiafulvalene-functionalized calix[4]pyrrole (TTF-C[4]P) and a glycol diester-linked bis-2,5,7-trinitrodicyanomethylenefluorene-4-carboxylate (TNDCF), respectively. We show that when mixed in organic solvents, such as CHCl3 , CH2 ClCH2 Cl, and methylcyclohexane, supramolecular aggregation takes place to produce short oligomers stabilized by hydrogen bonding and donor-acceptor charge-transfer (CT) interactions. The self-associated materials were characterized by 1 H NMR and UV/Vis/NIR absorption spectroscopy, as well as by concentration- and temperature-dependent absorption spectroscopy and dynamic light scattering (DLS) analyses of both the monomeric and oligomerized species. The self-associated system produced from TTF-C[4]P and TNDCF exhibits a concentration-dependent aggregation behavior typical of supramolecular polymers. Further support for the proposed self-assembly came from theoretical calculations. The fluorescence emitting properties of TNDCF are quenched under conditions that promote the formation of supramolecular aggregates containing TTF-C[4]P and TNDCF. This quenching effect has been utilized as a probe for the detection of substrates in the form of anions (i.e., chloride) and nitroaromatic explosives (i.e., 1,3,5-trinitrobenzene). Specifically, the addition of these substrates to mixtures of TTF-C[4]P and TNDCF produced a fluorescence "turn-on" response.

Advances in the synthesis of functionalised pyrrolotetrathiafulvalenes.

The electron-donor and unique redox properties of the tetrathiafulvalene (TTF, 1) moiety have led to diverse applications in many areas of chemistry. Monopyrrolotetrathiafulvalenes (MPTTFs, 4) and bispyrrolotetrathiafulvalenes (BPTTFs, 5) are useful structural motifs and have found widespread use in fields such as supramolecular chemistry and molecular electronics. Protocols enabling the synthesis of functionalised MPTTFs and BPTTFs are therefore of broad interest. Herein, we present the synthesis of a range of functionalised MPTTF and BPTTF species. Firstly, the large-scale preparation of the precursor species N-tosyl-(1,3)-dithiolo[4,5-c]pyrrole-2-one (6) is described, as well as the synthesis of the analogue N-tosyl-4,6-dimethyl-(1,3)-dithiolo[4,5-c]pyrrole-2-one (7). Thereafter, we show how 6 and 7 can be used to prepare BPTTFs using homocoupling reactions and functionalised MPTTFs using cross-coupling reactions with a variety of 1,3-dithiole-2-thiones (19). Subsequently, the incorporation of more complex functionality is discussed. We show how the 2-cyanoethyl protecting group can be used to afford MPTTFs functionalised with thioethers, exemplified by a series of ethylene glycol derivatives. Additionally, the merits of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as an alternative to the most common deprotecting agent, CsOH·H2O are discussed. Finally, we show how a copper-mediated Ullman-type reaction can be applied to the N-arylation of MPTTFs and BPTTFs using a variety of aryl halides.

Self-assembled architectures with segregated donor and acceptor units of a dyad based on a monopyrrolo-annulated TTF-PTM radical.

An electron donor-acceptor dyad based on a polychlorotriphenylmethyl (PTM) radical subunit linked to a tetrathiafulvalene (TTF) unit through a π-conjugated N-phenyl-pyrrole-vinylene bridge has been synthesized and characterized. The intramolecular electron transfer process and magnetic properties of the radical dyad have been evaluated by cyclic voltammetry, UV/Vis spectroscopy, vibrational spectroscopy, and ESR spectroscopy in solution and in the solid state. The self-assembling abilities of the radical dyad and of its protonated non-radical analogue have been investigated by X-ray crystallographic analysis, which revealed that the radical dyad produced a supramolecular architecture with segregated donor and acceptor units in which the TTF subunits were arranged in 1D herringbone-type stacks. Analysis of the X-ray data at different temperatures suggests that the two inequivalent molecules that form the asymmetric unit of the crystal of the radical dyad evolve into an opposite degree of electronic delocalization as the temperature decreases.

Robust inclusion complexes of crown ether fused tetrathiafulvalenes with Li⁺@C60 to afford efficient photodriven charge separation.

Inclusion complexes of benzo- and dithiabenzo-crown ether functionalized monopyrrolotetrathiafulvalene (MPTTF) molecules were formed with Li(+)@C60(1⋅Li(+)@C60 and 2⋅Li(+)@C60). The strong complexation has been quantified by high binding constants that exceed 10(6) M(-1) obtained by UV/Vis titrations in benzonitrile (PhCN) at room temperature. On the basis of DFT studies at the B3LYP/6-311G(d,p) level, the orbital interactions between the crown ether moieties and the π surface of the fullerene together with the endohedral Li(+) have a crucial role in robust complex formation. Interestingly, complexation of Li(+)@C60 with crown ethers accelerates the intersystem crossing upon photoexcitation of the complex, thereby yielding (3)(Li(+)@C60)*, when no charge separation by means of (1)Li(+)@C60* occurs. Photoinduced charge separation by means of (3)Li(+)@C60* with lifetimes of 135 and 120 µs for 1⋅Li(+)@C60 and 2⋅Li(+)@C60, respectively, and quantum yields of 0.82 in PhCN have been observed by utilizing time-resolved transient absorption spectroscopy and then confirmed by electron paramagnetic resonance measurements at 4 K. The difference in crown ether structures affects the binding constant and the rates of photoinduced electron-transfer events in the corresponding complex.

Mono- and bis(pyrrolo)tetrathiafulvalene derivatives tethered to C60: synthesis, photophysical studies, and self-assembled monolayers.

A series of mono- (MPTTF) and bis(pyrrolo)tetrathiafulvalene (BPTTF) derivatives tethered to one or two C60 moieties was synthesized and characterized. The synthetic strategy for these dumbbell-shaped compounds was based on a 1,3-dipolar cycloaddition reaction between aldehyde-functionalized MPTTF/BPTTF derivatives, two different tailor-made amino acids, and C60. Electronic communication between the MPTTF/BPTTF units and the C60 moieties was studied by a variety of techniques including cyclic voltammetry and absorption spectroscopy. These solution-based studies indicated no observable electronic communication between the MPTTF/BPTTF units and the C60 moieties. In addition, femtosecond and nanosecond transient absorption spectroscopy revealed, rather surprisingly, that no charge transfer from the MPTTF/BPTTF units to the C60 moieties takes place on excitation of the fullerene moiety. Finally, it was shown that the MPTTF-C60 and C60-BPTTF-C60 dyad and triad molecules formed self-assembled monolayers on a Au(111) surface by anchoring to C60.

Ion-regulated allosteric binding of fullerenes (C60 and C70) by tetrathiafulvalene-calix[4]pyrroles.

The effect of ionic species on the binding of fullerenes (C60 and C70) by tetrathiafulvalene-calix[4]pyrrole (TTF-C4P) receptors and the nature of the resulting supramolecular complexes (TTF-C4P + fullerene + halide anion + tetraalkylammonium cation) was studied in the solid state through single crystal X-ray diffraction methods and in dichloromethane solution by means of continuous variation plots and UV-vis spectroscopic titrations. These analyses revealed a 1:1 stoichiometry between the anion-bound TTF-C4Ps and the complexed fullerenes. The latter guests are bound within the bowl-like cup of the C4P in a ball-and-socket binding mode. The interactions between the TTF-C4P receptors and the fullerene guests are highly influenced by both the nature of halide anions and their counter tetraalkylammonium cations. Three halides (F(-), Cl(-), and Br(-)) were studied. All three potentiate the binding of the two test fullerenes by inducing a conformational change from the 1,3-alternate to the cone conformer of the TTF-C4Ps, thus acting as positive heterotropic allosteric effectors. For a particular halide anion, the choice of tetraalkylammonium salts serves to modulate the strength of the TTF-C4P-fullerene host-guest binding interactions and, in conjunction with variations in the halide anion, can be exploited to alter the inherent selectivity of the host for a given fullerene. Differences in binding are reflected in the excited state optical properties. Overall, the present four-component system provides an illustration of how host-guest binding events involving appropriately designed artificial receptors can be fine-tuned via the addition of simple ionic species as allosteric modulators.